Religious

Lecture Recording & Livestreaming

High-quality livestreams let anyone who can't physically attend still learn and benefit, and uploading the livestreams as lecture recordings lets people watch on their own time. This guide covers the entire process, from the hardware setup at the event to the post-processing needed for uploading.

Prerequisites

  • A laptop: both Windows and macOS are confirmed to work; Linux is untested.
  • A camera: the MSA owns a Sony ZV-E10 and a Canon EOS R10. Both work, but the Sony is preferred.
  • A micro-HDMI to HDMI cable.
  • An HDMI to USB capture card.
  • A USB-C charging cable + brick OR a dummy battery.
  • At least 2 wireless lavalier mics: the MSA owns 2 pairs of cheap wireless mics; Araad Shams also has a nicer pair he lets us use (preferred).
  • OBS (obsproject.com), HandBrake (handbrake.fr), and FFmpeg (ffmpeg.org), download and install.
  • Access to MSA online accounts (ask VP Education): YouTube (preferred for livestreaming, mandatory for video recordings), Twitch (secondary), Instagram (tertiary, untested), Spotify for Creators (preferred for audio), and Apple Podcasts (secondary for audio).
  • (Optional) A cloud storage solution to store large recording files and share them internally before posting to YouTube.

Hardware Setup

  1. Set up the tripod and attach the camera using the plate that screws into the bottom of the camera.
  2. Plug in the micro-HDMI to HDMI cable. The micro end goes to the camera (panel on the left side opens to reveal the port); the full-size end plugs into the capture card.
  3. Plug the aux cable of the mic receiver module into the camera (use the aux port above the micro-HDMI port, not below).
  4. Plug the camera charger into the camera's USB-C port OR remove the camera battery, insert the dummy battery, and plug it in.
  5. Plug the capture card into your laptop (the USB-C plug comes off to reveal a USB-A port if needed).
  6. Attach the windscreens to the mic transmitter modules and give them to the speakers. The receiver module can have the gain for each transmitter adjusted, +6 or +9 dB works best depending on how loud the speaker is.

Note: All hardware can be found in the blue Walmart tech bag in the locker; return all equipment there as you found it. Ensure the camera, mics, and laptop are charged, and have extension cords and chargers on hand in case something dies. The steps below assume you're using the Sony ZV-E10 and Araad's mics.

Software Setup

  1. Run OBS.
  2. In the "Controls" panel on the right, make sure "Studio Mode" is selected so you have 2 video viewers. The right one is what actually goes to the stream/recording; the left is a preview for switching Scenes and adding Sources without the audience seeing it. The preview only goes live to "Program" when you hit "Transition".
  3. In the "Sources" panel:
    • Add a "Video Capture Device" source, click "Ok", and select "USB Video" as the device.
    • Add an "Audio Capture Device" source, click "Ok", and select "USB Audio" as the device.
  4. Ensure you can see the video from the camera in "Preview" and the audio signal moving in the "Audio Mixer" panel under "Audio Capture Device", then hit "Transition".
  5. In the "Controls" panel, click "Settings":
    • In the "Stream" tab, choose "YouTube - RTMPS" as the Service, click "Connect Account", and log in to the MSA email account.
    • Under "General" → "Output", check "Automatically record while streaming".
    • Under "Output" → "Recording", select the folder where recordings save.
    • Under "Video" → "General", change "Output (Scaled) Resolution" to "1920x1080" and "Recording Format" to "Fragmented MP4".
  6. In the "Controls" panel, click "Manage Broadcast":
    • Select "Remember these settings".
    • Set a title (e.g. "Sheikh & Shai: Emotional Intelligence with Ustadh Hassan").
    • Set "Privacy" to "Public" and "Category" to "Education".
    • Select "No, it's not made for kids", then click "Create Broadcast".
  7. When ready to start, click "Transition", then in the "Controls" panel click "Start Streaming" (this also starts recording).
    • Share the livestream link on WhatsApp and send it to Marketing so they can post it on Instagram too.
    • When done, click "Stop Streaming" and "Yes" (this also stops the recording).

Notes: Steps 2-5 only need to be done once, OBS remembers your settings. The broadcast in Step 6 can be created before the hardware is set up (just don't start it). After the hardware is set up at an event, all you need is Steps 1, 6 (if not done before), and 7.

Post-Processing

Video Cleanup

YouTube automatically publishes livestreams after they end, but we post a cleaned, higher-quality version instead. Some speakers may also request the recording not be posted or that some parts be edited out.

  1. Go to studio.youtube.com, find the livestream under "Content" → "Live", and change "Visibility" to "Unlisted".
  2. Open the recording in your editor of choice (DaVinci Resolve) and make the necessary edits: trim the start to where the speaker begins; trim the end to where the relevant discussion ends (cut announcements, housekeeping, applause); cut out any parts the speaker requested; and fix any audio/video sync issues by unlinking the audio and nudging it in the timeline.
  3. Render out the cleaned recording at 1080p named "<Title> (Master)".
  4. Compress the final video with HandBrake: open the rendered video via "Open Source", set the Preset to "General" → "Fast 1080p30", change the "Save As" name to just "<Title>" (same folder), then click "Start".
  5. Watch the final compressed video to confirm everything is good, then share it with the team (ask VP Education for the appropriate cloud links to upload to).

YouTube Upload

Usually Marketing handles uploading the recordings with a nice thumbnail. If not, go to studio.youtube.com and upload with a nice title and description. Make it public, not for kids, and add it to the appropriate playlist.

Podcast Upload

Audio versions of events are uploaded to Spotify and Apple Podcasts so people can listen.

  1. Create the audio file: open a terminal in the folder with the final recording and run ffmpeg -i <Title>.mp4 -vn <Title>.mp3. Share the file with the team if you're not uploading it.
  2. Upload to Spotify for Creators (podcasters.spotify.com): click "New episode", select the mp3, and use the title format Event Term | Topic | Speaker (e.g. "Sheikh & Shai F24 | Emotional Intelligence | Ustadh Hassan Syed"). Add a brief description of the key takeaways; set the correct "Episode art" (ask Marketing/External); mark "No" for both Explicit and Promotional content; skip the poll unless needed; set episode type to "Full", with Season Number increasing each term the event continues (otherwise start at 1) and Episode Number increasing chronologically from 1; leave comments "On" unless you decide otherwise; then publish.
  3. Upload to Apple Podcasts: once an episode is on Spotify it should auto-upload to Apple Podcasts via the shared RSS feed. Otherwise, find the RSS link under Settings → Availability → RSS Distribution → RSS Feed.